PS4 Controller Charger Stand
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a stand to hold and charge two PS4 controllers. Print PS4_Holder_Base file once and PS4_holder_ends file twice.
- Ocena
- 0 / 5
- Polubienia
- 16
- Pobrania
- 301
- Wydruki
- 0
- Wyświetlenia
- 3796
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Video Games
- Licencja
- Creative Commons — Attribution — Noncommercial
This is a stand to hold and charge two PS4 controllers.
Print PS4_Holder_Base file once and PS4_holder_ends file twice.
Screws that work are:
- 4x M4 grub screw (from creator)
- 2x #6-32 3/8" (used by me)
This is not my design. This is from https://www.thingiverse.com/schwaiger/about and is sourced from his design https://www.thingiverse.com/thing:1114608.
I'm posting it here so that I can share the .3mf and .gcode files as it includes my adjustments to save on support locations to save on material.
Print instructions
Print PS4_Holder_Base file once and PS4_holder_end file twice.
Screws that work are:
- 4x M4 grub screw (from creator)
- 2x #6-32 3/8" (used by me)