Wall Mount to display Baseball Caps
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A Wall Mount to display your Caps (New Era, etc.)
- Ocena
- 0 / 5
- Polubienia
- 12
- Pobrania
- 56
- Wydruki
- 0
- Wyświetlenia
- 371
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial
Because i wasn't satisfied with the Wall Mounts on Amazon I decided to design my own.
I added chamfers around the edge so someone could design a rail to slide the mount into for easier mounting to a wall. There is also a screw hole in the middle if you want to attach it via a nail or screw to the wall. The Hole is M3.
This prints without any supports flat on the side that attaches to the wall. (basically how the model is already oriented)
Infill: about 40% to make it strong
Update 2024-23-03:
Uploaded a newer version with a tighter fit and removed the lower chamfer.