Egg painting station, 100% printable, no supports
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Fully printable with modified M14 threads for easy printing
- Ocena
- 5 / 5
- Polubienia
- 41
- Pobrania
- 174
- Wydruki
- 2
- Wyświetlenia
- 779
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Share Alike
Hello everyone,
UPDATE: Please pick v12 as it has some extra touches that will strengthen the print.
This is a fully printable 3D model for an easter egg painting station. There are 3 components to it:
- Base station
- Screw
- Screwcap with eggholder
The screw parts use manually adjusted M14 threads, and they should be printable without having to change presets on your machine. There is an increased clearance on the threads, and the edges of the threads have been rounded over.
I printed this with .2mm layer heigt and no special settings.
I'd be honored to have someone improve upon the model, but it works quite good as is!
*Note that I have added a little block to strengthen one of the pillars.
Please let me know what you think!
Happy easter!