Tacoma 2nd Gen Wireless Charger
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A hidden wireless charger for your Tacoma's cubbie.
- Ocena
- 0 / 5
- Polubienia
- 25
- Pobrania
- 72
- Wydruki
- 0
- Wyświetlenia
- 1635
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Print in high temp filament. PLA will melt in your car. No supports needed.
Gut the electronics out of the wireless charger linked here.
Snap the tabs off the printed part and test fit until the pitch is to your liking.
Drill a hole through the tray and feed in the USB cable
Hot glue the electronics onto the printed part. I glued the cable on as well.
Cut and attach the rubber mat
Use 5 minute epoxy to glue the part into the tray (hot glue wouldn't stick)
Install the tray
Route power to whatever USB power source you have. My double din head unit has USB power on the back so the cable is entirely hidden.
Enjoy wireless charging that looks stock.
Rubber Mat: https://a.co/d/hJWo2e5
Wireless Charger: https://a.co/d/7MygrLy (Yootech Wireless Charger 10W Max Fast Wireless Charging Pad Compatible with iPhone 16e/16/16 Plus/16 Pro Max/15/14/13/SE 2022/12/11/X/8 Galaxy S22/S21/S20 for 2)