Refrigerator Shelf Repair
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A brace for the center of a Frigidaire Refrigerator Door Rack
- Ocena
- 0 / 5
- Polubienia
- 11
- Pobrania
- 56
- Wydruki
- 0
- Wyświetlenia
- 379
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution
I have an old Frigidaire refrigerator where all three door racks (shelves) either started to crack or have completely cracked in the center. The cracks must have formed by items pushing out on the shelf brackets and fatiguing the center of the plastic.
Although likely not required, a small amount of glue was used to hold the brace in place.
The two parts are tightly fitted over the shelf and snap together. It is a tight fit and force is required.
Printed on a Prusa MK4 in PLA using 4 perimeters without supports. A brim was used to stabilize the outer brace as it was printed in a vertical orientation with minimal bed contact.
Frigidaire Refrigerator Door Rack - 23" (part number: 240535101)