Doggy Tape Dispenser
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Handheld dispenser gun for 50 mm packaging tape (up to 120 mm diameter) or any other tape under that range.
- Ocena
- 0 / 5
- Polubienia
- 35
- Pobrania
- 115
- Wydruki
- 0
- Wyświetlenia
- 843
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial
Model TD1 is prepared to fit a steel blade-saw like this one: https://www.amazon.es/gp/product/B0CD8YWD2Q/ref=ox_sc_saved_image_1?smid=AHP4NSCWH5R9U&psc=1
or https://www.amazon.com/Replaceable-Blades-IDHM-Packing-Dispensers/dp/B0CDC1J6YY/
With version TD1 you will have to screw directly into the plastic, as the holes might have different spacing depending on your blade.
Model TD2 works with a printed blade made of PLA. Print this part in 0.12mm layer height. (PLA blade can be glued or screwed)
You will just need a screw (WS) 3,5 x 25 mm for the movable lid and 2 short screws 3,5 x 10 mm for the blade (better if you cut these two screws shorter to 7 or 8 mm).
Tape dispenser body is ready to be printed together with the rod (you’ll have to remove the support between the body and the rod, but it’s quite easy)
Printing settings:
- 0.2mm layer height
- Support: tree slim/threshold angle 20 (but with Normal Snug works too)
- 15 % density infill
- 6 top shell layers
If you want to support this project, you can donate here: https://ko-fi.com/casaprint3d
Remember that this file is for personal use only - Commercial licenses are available in our Patreon
Happy printing!