Doggy Tape Dispenser
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Handheld dispenser gun for 50 mm packaging tape (up to 120 mm diameter) or any other tape under that range.
- Rating
- 0 / 5
- Likes
- 35
- Downloads
- 115
- Makes
- 0
- Views
- 843
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial
Model TD1 is prepared to fit a steel blade-saw like this one: https://www.amazon.es/gp/product/B0CD8YWD2Q/ref=ox_sc_saved_image_1?smid=AHP4NSCWH5R9U&psc=1
or https://www.amazon.com/Replaceable-Blades-IDHM-Packing-Dispensers/dp/B0CDC1J6YY/
With version TD1 you will have to screw directly into the plastic, as the holes might have different spacing depending on your blade.
Model TD2 works with a printed blade made of PLA. Print this part in 0.12mm layer height. (PLA blade can be glued or screwed)
You will just need a screw (WS) 3,5 x 25 mm for the movable lid and 2 short screws 3,5 x 10 mm for the blade (better if you cut these two screws shorter to 7 or 8 mm).
Tape dispenser body is ready to be printed together with the rod (you’ll have to remove the support between the body and the rod, but it’s quite easy)
Printing settings:
- 0.2mm layer height
- Support: tree slim/threshold angle 20 (but with Normal Snug works too)
- 15 % density infill
- 6 top shell layers
If you want to support this project, you can donate here: https://ko-fi.com/casaprint3d
Remember that this file is for personal use only - Commercial licenses are available in our Patreon
Happy printing!