Analogue Pocket Dock and Adapter Rack
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Minimalistic rack to hold the dock and the 4 released adapters for the Analogue Pocket
- Ocena
- 0 / 5
- Polubienia
- 27
- Pobrania
- 157
- Wydruki
- 1
- Wyświetlenia
- 1119
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Video Games
- Licencja
- Creative Commons — Attribution — Noncommercial
A minimalistic rack to fit all 4 adapters and the dock for the Analogue Pocket.
The goal was to fit everything well in a very small space, without requiring long printing times or a lot of filament.
There are also holes at the bottom to fit some rubber feet.
I recommend using a 0.4mm nozzle or smaller if you want to print this in multicolor, as the letters will not turn out great with bigger ones (already tested).
I also included a right-sided version and one without any markings or logo.
All three are available with and without holes for rubber feet.