ESP32 CAM case with USB C type connector space (no screws)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
ESP32 CAM Case with space for a USB C connector. No screws required.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 134
- Wydruki
- 0
- Wyświetlenia
- 892
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Photo & Video
- Licencja
- Creative Commons — Attribution — Noncommercial
ESP32 CAM Case.
You can either pass a cable and connect them directly to the ESP32 CAM pins or use a USB C Type connector like this (no affiliate link just one I found) you can get for cheap and make it look nice
You should notice that this case doesn't accommodate the dev board (the one usually sold with the esp32 cam with an usb interface for programming).
You don't need the dev module to make the camera work, only for programming, once programmed you can simply power the cam using the 5V and GND pins, making the full case much smaller
The main body can print without supports
The lid needs supports in the little tab that attaches to the main body