Ikea Skadis 100x100 VESA Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Monitor mount for Ikea Skadis
- Ocena
- 0 / 5
- Polubienia
- 24
- Pobrania
- 211
- Wydruki
- 0
- Wyświetlenia
- 1165
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- GNU General Public License v3.0
I have used PETG to print this model.
I have purchased set of M4 16mm screws.
Suggested print settings (see .3mf file) for 0.6mm nozzle:
- Nozzle: 0.6 mm
- Perimeters: 8
- Infill: 100%
- Temperature: increase by 10°C over the default profile
- Extrusion multiplier: 1.075
- 0.32 mm layer (SPEED profile) - without Input Shaper
- Print standing, with organic supports
Suggested print settings for 0.4mm nozzle:
- Nozzle: 0.4 mm
- Perimeters: 8
- Infill: 100%
- Temperature: increase by 10°C over the default profile
- Extrusion multiplier: 1.075
- 0.2 mm layer
- Print standing, with organic supports
It takes around 155g of filament to print. I'm somewhat paranoid :D