1 / 2
OpenRC F1 2023 Car - Tamiya F104 tires
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I remixed the tires to be the same size as the Tamiya F104 tires
- Ocena
- 0 / 5
- Polubienia
- 22
- Pobrania
- 212
- Wydruki
- 0
- Wyświetlenia
- 755
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Share Alike
SzczegółyPliki (2)Wydruki i komentarze (Wydruki: 0) (Komentarze: 2)Remiksy (0)Kolekcje (21)Powiązane
I remixed the “OpenRC F1 2023 Car - Full Part Set”, I remade the tires to be the same size as the Tamiya F104 tires
Print files
- Front_Tire_V1
- Rear_Tire_V1
Print settings
- Printed on my prusa mk4
- Printed with Input Shaper (structural)
- Printed with .15mm layer height
- Printed with .4 nozzle
- Printed with TPE (85A)
- Printed without supports
- More perimeters or infill makes the tire stiffer (You can try to change it a bit if the tire isnt strong enough)
- 2 perimters
- 15% infill
Additional info
- If printed with Input Shaper I recommend printing in the structural preset. This way the part is stronger and will last longer.