14 modeli
Update: Pre-cut vinyl stickers for the tires availble! https://www.thingiverse.com/make:1095612 In addition of Boyson-IPL's OpenRC F1 2022 remix, I designed Tamiya F104 compatible rims that look like the 18 inch wheel aero covers from the…
I remixed the “OpenRC F1 2023 Car - Full Part Set”, I remade the tires to be the same size as the Tamiya F104 tires Print files Front_Tire_V1 Rear_Tire_V1 Print settings Printed on my prusa mk4 Printed with Input Shaper (structural)…
OpenRC F1 - 2017 style wheels that fit Tamiya F104 tires. Package also includes the outer thrust plate that is compatible with the Ball Diff found at ( https://www.thingiverse.com/thing:3085455 ) In the spirit of OpenRC, STEP files are…
Print with the out side face of the wheel down with support for the outer tire lip and center face only. Wheel face grove doesn't need support. 15% infill is plenty with 3 or 2 wall loops.
Slight edit to the rear edges of the chassis to add clearance for the Tamiya f104 tires, which rub on the stock chassis. This is the rear for the 2017 version chassis.
Original design by FSXPilot14 on Thingiverse. https://www.thingiverse.com/thing:5414118 Full credit to FSXPilot14 for designing the reinforced rotors. Key changes I made to FSXPilot14's design: Fin is much closer to tire (represents scale…
This remix adds about 10mm to the mount so the front end sits further away from the wall. I'm using the F104 tires and they're thicker (taller) than the printable tires which made the original mount too narrow and the back tires were…
Display your build on the wall and free up some shelf space all without having to drill a single hole in your wall. The bracket hangs your F104 by the front bumper and is quite secure. Use an adhesive 3M command strip (~75mm long). Screw…
I've bought a used F104W GP chassis with the nice carbon fiber plates all around. When I tried to install a F104W/F103 body on it I realized body post holes and antenna holes were in a different place so I created adapters that allows you…
Requires four magnets with a diameter of 6mm and a height of 3mm For 3mf, load it as a multi-part file. For stl, drag both files together into Slicer and load them as multi-part files. Then set the middle part as a modifier and set the…
I printed these wheels for my 2017 OpenRC F1 and noticed that the rear wheels could slide along the original 2017 axle from Daniel Norée's website. So I made these spacers! They should perfectly space out the left wheel to the end of the…
Overview To address the issue of poor sound quality in the rear seats of a Toyota Hiace, we designed a 3D-printed part for installing a Carrozzeria TS-F1040-2 speaker in the ceiling space next to the factory air conditioner. This part…
