1 / 3
Makita charger flat wall mount for DC18RC, DC18SD, DC18SH — zdjęcie 1
1 / 3

Makita charger flat wall mount for DC18RC, DC18SD, DC18SH

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Simple flat mount design for most popular chargers, press fit the charger on the mount for a secure fit.

Ocena
4,9 / 5
Polubienia
97
Pobrania
1228
Wydruki
8
Wyświetlenia
3794
Oceny
10

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Tools
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

A simple flat mount for the most common Makita chargers on the market, no need to try and line things up like with the single foot models or like the dual tilted ones. This model is easy to print and easy to use.
 

To install charger, screw mount at desired location with #8 screws, remove the four rubber feet under the charger and press the charger down onto the pegs on the mount for a perfect fit.

If you would like to have the same style mount for another model Makita charger, just ask and I'll send you instructions for how to measure for your charger. 

This is a remix of a model found on MakerWorld, I redid the model, added the Makita logo with charger model number on the frame. Also made my model parametric, so it is easy to make new mounts for different chargers.

For the dual chargers, I also included a split version of the mount for people with smaller build volumes, just snap both together when done printed.

Recommended printing settings…

  • 6 wall loops 
  • 100% infill 
  • rectilinear pattern infill
  • no need for supports or brims. 

 

I have used both PLA and PETG for this and they work perfectly.

 

Please rate, post makes and like my models.

Tagi