1 / 7
Card Box Deck Holder Kartenschachtel — zdjęcie 1
1 / 7

Card Box Deck Holder Kartenschachtel

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Informacje o modelu

Źródło
Printables
Kategoria
Outdoor Toys
Licencja
Creative Commons — Attribution — Share Alike

This is a simple card game deck holder consisting of two parts. Design is inspired by JeremyVS's "Customizable Card Box with Cutouts" and been modified to fit the UNO card design.

Card size: 8.8cm x 5.6cm

2020/09/26 UPDATE: V2 with updated tolerances and an optional bottom part without cutout
2016/06/27 UPDATE: A new bottom Part added which is 5mm higher.

Print Settings

Printer Brand:

RepRap

Printer:

Prusa i3

Rafts:

No

Supports:

No

Resolution:

0.2mm

Infill:

15%

Notes:

I printed this in PLA on my Afinibot A3 (prusa i3) using Sli3er and Repetier-Host with the following parameters:

  • 2 perimeters

  • 2 solid layers (top/bottom)

  • 15% infill

  • 0.2mm layer hight (first layer 0.3mm) PLEASE NOTE: You will have to rotate the top cover 180° around the X- or Y-axis to place the flat side on the printer bed.

    How I Designed This

    Compared to the source design I edited some elements like elliptical cutout to fit the design of the UNO card game, so you can see the UNO logo nearly completely. I also rounded the corners of the box, edited the clips and added some structured areas on the sides of the cover for a better grip. At last I splited the Thing into two separat STL-files to print both parts of the box separately.

Category: Toy & Game Accessories

Tagi