Gizmos All In One Dispenser and Storage
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is both a marble dispenser and storage solution. Use this and ditch the box. Goes great with metallic filament :)
- Ocena
- 0 / 5
- Polubienia
- 10
- Pobrania
- 61
- Wydruki
- 0
- Wyświetlenia
- 710
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Board Games
- Licencja
- Creative Commons — Attribution — Noncommercial
Printed in PLA on my P1S.
I highly recommend Moon Marbles to complete the look: https://www.moonmarble.com/c-181-solid-colored-game-marbles-58.aspx
The component insert fits into the hopper with a clearance of .4mm. This is to account for inconsistent extrusion, shrinkage/expansion, etc for the slip fit. You could slightly scale the part up or down in the slicer depending on your conditions.
Use 4x magnets to secure on the marble chute. I used 3/8" by 1/8" N52 neodymium disc magnets in the design. These may fit tight depending on the batch of magnets you get. If so heat them up to melt it in place.
You might have to sand the transition threshold from the hopper to the chute to ensure smooth marble flow, depending on your slicer/tuning. In my testing there are minimal jams in marble flow, however i only tested with my nice aftermarket ones which have a different mass and friction than the stock plastic ones ☺