1 / 7
Gizmos All In One Dispenser and Storage — image 1
1 / 7

Gizmos All In One Dispenser and Storage

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

This is both a marble dispenser and storage solution. Use this and ditch the box. Goes great with metallic filament :)

Rating
0 / 5
Likes
10
Downloads
61
Makes
0
Views
710
Reviews
0

Updated at source:

Model information

Category
Board Games
License
Creative Commons — Attribution — Noncommercial

Printed in PLA on my P1S.

I highly recommend Moon Marbles to complete the look: https://www.moonmarble.com/c-181-solid-colored-game-marbles-58.aspx

The component insert fits into the hopper with a clearance of .4mm. This is to account for inconsistent extrusion, shrinkage/expansion, etc for the slip fit. You could slightly scale the part up or down in the slicer depending on your conditions. 

Use 4x magnets to secure on the marble chute. I used 3/8" by 1/8" N52 neodymium disc magnets in the design. These may fit tight depending on the batch of magnets you get. If so heat them up to melt it in place.

You might have to sand the transition threshold from the hopper to the chute to ensure smooth marble flow, depending on your slicer/tuning. In my testing there are minimal jams in marble flow, however i only tested with my nice aftermarket ones which have a different mass and friction than the stock plastic ones ☺ 

Tags