Original Prusa i3 MK3/MK3S foot holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
The rubber feet that are included with the Prusa i3 MK3 are a bit annoying since they fall off if you just look at the…
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 28
- Wydruki
- 0
- Wyświetlenia
- 339
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
The rubber feet that are included with the Prusa i3 MK3 are a bit annoying since they fall off if you just look at the printer but the soft rubber they are made of is quite nice to reduce vibrations so I made some holders for them.
These holders are secured to the 3030 extrusions with a t-slot nut and a screw and after this the rubber feet are pressed into them. You might use some water as lube when pressing them in.
EDIT: Since people seems to have a lot of different screws they want to use, I uploaded a .step file for easy editing :)
Print Settings
Printer Brand:
Prusa
Printer:
i3 MK3
Doesn't Matter
Supports:
No
0.2
Infill:
10%
Filament:
Generic TPU
Notes:
Printed in flex to even further reduce vibrations. 2 perimeters. Print flex slowly!
Category: 3D Printer Parts