Original Prusa i3 MK3/MK3S foot holder
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
The rubber feet that are included with the Prusa i3 MK3 are a bit annoying since they fall off if you just look at the…
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 28
- Makes
- 0
- Views
- 339
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Prusa Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial
The rubber feet that are included with the Prusa i3 MK3 are a bit annoying since they fall off if you just look at the printer but the soft rubber they are made of is quite nice to reduce vibrations so I made some holders for them.
These holders are secured to the 3030 extrusions with a t-slot nut and a screw and after this the rubber feet are pressed into them. You might use some water as lube when pressing them in.
EDIT: Since people seems to have a lot of different screws they want to use, I uploaded a .step file for easy editing :)
Print Settings
Printer Brand:
Prusa
Printer:
i3 MK3
Doesn't Matter
Supports:
No
0.2
Infill:
10%
Filament:
Generic TPU
Notes:
Printed in flex to even further reduce vibrations. 2 perimeters. Print flex slowly!
Category: 3D Printer Parts