Shampoo holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A holder for two large (ø ~92mm ) shampoo and conditioner bottles to be squeezed onto two 12mm pipes. When I finished…
- Ocena
- 0 / 5
- Polubienia
- 13
- Pobrania
- 29
- Wydruki
- 0
- Wyświetlenia
- 569
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bathroom
- Licencja
- Creative Commons — Attribution
A holder for two large (ø ~92mm ) shampoo and conditioner bottles to be squeezed onto two 12mm pipes.
When I finished the design I realized it would require a lot of support material to print but I had lost interest in this model at that point so I just printed it that way. Be aware of this if you are going to print it (see pictures)
Print Settings
Printer Brand:
Prusa
Printer:
i3 MK2S
No
Supports:
Yes
I used adaptive, but 0.2 would work fine
Infill:
15%
Notes:
Printed in white PLA, maybe not the most suitable for water but it has worked for 4 months now.
Post-Printing
I added some rubber (purple parts) to prevent sliding on the pipes. I also added some m3 threaded brass inserts in the back plate by heating them up with a soldering iron and pressing them into the holes from the back. I then stuck the back plate behind the pipes and screwed the holder body into the back plate.
Category: Bathroom