Shampoo holder
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A holder for two large (ø ~92mm ) shampoo and conditioner bottles to be squeezed onto two 12mm pipes. When I finished…
- Rating
- 0 / 5
- Likes
- 13
- Downloads
- 29
- Makes
- 0
- Views
- 569
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Bathroom
- License
- Creative Commons — Attribution
A holder for two large (ø ~92mm ) shampoo and conditioner bottles to be squeezed onto two 12mm pipes.
When I finished the design I realized it would require a lot of support material to print but I had lost interest in this model at that point so I just printed it that way. Be aware of this if you are going to print it (see pictures)
Print Settings
Printer Brand:
Prusa
Printer:
i3 MK2S
No
Supports:
Yes
I used adaptive, but 0.2 would work fine
Infill:
15%
Notes:
Printed in white PLA, maybe not the most suitable for water but it has worked for 4 months now.
Post-Printing
I added some rubber (purple parts) to prevent sliding on the pipes. I also added some m3 threaded brass inserts in the back plate by heating them up with a soldering iron and pressing them into the holes from the back. I then stuck the back plate behind the pipes and screwed the holder body into the back plate.
Category: Bathroom