SodaStream adapter with a grip
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
An adapter to use soda bottles (European?) with your SodaStream machine. This adapter fits the older style of…
- Ocena
- 4 / 5
- Polubienia
- 74
- Pobrania
- 1026
- Wydruki
- 5
- Wyświetlenia
- 5830
- Oceny
- 4
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Noncommercial
An adapter to use soda bottles (European?) with your SodaStream machine. This adapter fits the older style of SodaStream threads (pre 2018?). What differs this from the others here on Thingiverse is the grip on this adapter to remove it from the bottle or the machine easier if it sticks.
When you use this, make sure you don't overfill the bottle. Compare with your original bottles to see how much the spout should be bellow the surface
Print Settings
Printer Brand:
Prusa
Printer:
i3 MK2S
No
Supports:
Yes
0.2
Infill:
25%
Notes:
Printed in black PETG.
If you are feeling lucky you can print this without supports, I did. If your printer/material combo is prone to make spaghetti when printing unsupported, make sure to only have supports from build plate to support the small circle plane around the threads for the soda bottle.
DISCLAIMER
Since every printer/material will give different results, be careful when you use this. I take no responsibility if you explode PLA shards into your eyes.
Category: Kitchen & Dining