The Cuckoo clock – BTT EBB36 cover
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Slick Voron style cover for EBB36!
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 64
- Wydruki
- 0
- Wyświetlenia
- 649
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Voron Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Since EBB36 sports a rounded aesthetic I decided I should dip (and apparently sink) into the motif.
After many hours in CAD and uncountable number of energy drinks this piece of engineering was made. Aptly named Cuckoo clock, for the cuckoo who made it.
Comes in two flavours:
Pocket Cuckoo – meant to be compact, while still looking good and providing ample space for cable management, total height of 25.6 mm, mounted with M3×25
Grandfather's Cuckoo – The all out big cover, with space for all your noodle spaghetti rat's nest of mismanaged cables (like mine), but at 41.6 mm tall, it might not be a good fit everywhere, to be mounted with M3×30
You can use either BCSH or SCSH type screws.
Print with Voron profile (can do 20% infill, but other settings are a must) in sufficiently heat resistant plastic (PET-G/PCT-G for open air and ASA/ABS for enclosed machines).
Plug all your cables to the EBB36, motor cables route through the gap up top and rest go down into the toolhead, then cover it and screw down.