Inventr Hero Board Mounting
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A mounting board for the Inventr Hero Board and ancillaries.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 127
- Wydruki
- 0
- Wyświetlenia
- 590
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Downloaded the Breadboard Arduino Uno Holder by Ubiquities | Download free STL model | Printables.com by Ubiquities initially and although I liked the model i felt it lacked the ability to have all the components on it. I had worked out an Arduino holder previously so slightly tweaked it to hold the OLED and segment display instead of the larger screens.
Added a side component that would hold the keypad and pot alongside the breadboard. Initially I was going to just use the larger breadboard but felt this was better use of the space.
All mounting holes need to be tapped out. OLED is M3: HERO board, Potentiometer and the back plate are M2.5 and the segment display is M2. You might be able to just screw the bolts in place.
I printed without supports. Place the back screen on its front face. Use whatever filament you like. I generally print with three walls minimum for tapping.