1 / 3
Organic Desktop Bin
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Organic Desktop Bin to put your pencels or simply your trash into.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 18
- Wydruki
- 0
- Wyświetlenia
- 103
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Gadgets
- Licencja
- Creative Commons — Attribution — Noncommercial
This organic bin is a fun spiral vase mode print. Challenge your printer while adding a unique touch to your workspace with this trash bin!
How to print:
Make sure you have setup your slicer to use spiral/vase mode.
- PrusaSlicer: In the Print Settings tab, enable the "Spiral Vase" mode.
- Bambu Studio: Under the "Special" tab, turn on "Vase Mode."
- Cura: The setting is called "Spiralize Outer Contour."
Customize to your own needs with OpenSCAD:
Want to make this bin larger, smaller, or change the organic shape? Here are some values you can adjust in the OpenSCAD file:
- Bottom, middle, top: Control the overall dimensions of the bin.
- Height: Make it taller or shorter.
- Lobe: Change the number of curves for a different shape.
- Twist: Add more (or less) twist to the form.
- Smoothness: Add more details to the shape