PRUSA enclosure holders for xLCD display back cover by PEVEES
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
PRUSA enclosure simplified holders for my model of xLCD display back cover
- Ocena
- 5 / 5
- Polubienia
- 12
- Pobrania
- 65
- Wydruki
- 3
- Wyświetlenia
- 465
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
Some have already downloaded my model of the xLCD back cover, which PRUSA does not supply as standard with their MK4 printer. If you don't have it yet, check it out and try it.
https://www.printables.com/cs/model/792929-back-cover-for-xlcd-display-compatible-with-front
It will serve well to protect your xLCD from the back and is more pleasant to handle. User @HomerSimpson83 asked me to create mounts for him to use my model with the original PRUSA enclosure. Personally, I don't have the enclosure yet, but with his help the model was easily realized quickly…Thank you for help @HomerSimpson83.
Simple short printing... with only one change in the used screws... instead of M3x16 screws, you will use M3X10 screws... I hope you like the model of the xLCD back cover with the brackets and it will serve well with your original Prusa enclosure together...Thank you in advance for the constructive feedback.
Peeves :-)