Prusa Enclosure MMU3 buffer hanger
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
NOTE: I AM USING A MOBILE AND CANNOT VERIFY THIS UPLOAD. Attach the buffer to existing holes on the enclosure.
- Ocena
- 5 / 5
- Polubienia
- 45
- Pobrania
- 174
- Wydruki
- 0
- Wyświetlenia
- 2325
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Creative Commons — Attribution
Please let me know if there is an issue and I will fix it when I am back in front of my computer. (Contributed using mobile device)
I'll also provide proper assembly instructions later as well.
~~~~~~~
The buffer cassette for the MMU3 can be challenging when the printer is in the Prusa enclosure.
I created this model that has two print pieces that allow the buffer to be bolted to the side or rear of the enclosure. A piece is removed from the existing cassette and replaced with the spacer from the top front. A new printed spacer goes on it's place and is used to bolt the hanger to the cassette.
The assembly is then bolted to the enclosure. You will need to supply 2 M3 x 16 bolts and M3S nuts. And 2 M3 x 40 bolts and M3S nuts.