Prusa Enclosure MMU3 buffer hanger
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
NOTE: I AM USING A MOBILE AND CANNOT VERIFY THIS UPLOAD. Attach the buffer to existing holes on the enclosure.
- Rating
- 5 / 5
- Likes
- 45
- Downloads
- 174
- Makes
- 0
- Views
- 2,325
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Prusa Parts & Upgrades
- License
- Creative Commons — Attribution
Please let me know if there is an issue and I will fix it when I am back in front of my computer. (Contributed using mobile device)
I'll also provide proper assembly instructions later as well.
~~~~~~~
The buffer cassette for the MMU3 can be challenging when the printer is in the Prusa enclosure.
I created this model that has two print pieces that allow the buffer to be bolted to the side or rear of the enclosure. A piece is removed from the existing cassette and replaced with the spacer from the top front. A new printed spacer goes on it's place and is used to bolt the hanger to the cassette.
The assembly is then bolted to the enclosure. You will need to supply 2 M3 x 16 bolts and M3S nuts. And 2 M3 x 40 bolts and M3S nuts.