Capcom CPS3 Standoffs for Jasen's Customs/TR Fightstick Metal Cases
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Standoffs to support the Capcom CPS3 mainboard in custom metal cases sold by Jasen's Customs and TR Fightstick
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 37
- Wydruki
- 0
- Wyświetlenia
- 327
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Video Games
- Licencja
- Creative Commons — Attribution — Share Alike
This model is a standoff for CPS3 mainboards in custom metal cases by Jasen's Customs or TR Fightstick. Placing standoffs on the bottom of the CPS3 mainboard prevents unnecessary flex when inserting the security cartridge, which is a known cause of mainboard failures.
My recommendation is to print 4 supports and place three across the middle of the mainboard, and one in the middle near the JAMMA edge (see attached picture). Mount the standoffs with foam tape upside down with the larger side attached to the mainboard to provide a larger surface area on the board and minimize potential damage.
I printed with standard quality using PLA+, pretty much anything you have on-hand should work if it is structurally solid.