1 / 6
Creality K1C/K1 Back Fan Protection (No screws required) — zdjęcie 1
1 / 6

Creality K1C/K1 Back Fan Protection (No screws required)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Protects the fan from accidental flying or loose parts. Had a near miss and decided to make this.

Ocena
5 / 5
Polubienia
34
Pobrania
369
Wydruki
0
Wyświetlenia
1355
Oceny
2

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

This is a protection/ grill for the 60mm back fan in the Creality K1C to protect it from flying or loose parts. I supposed Creality K1 also has one at the back.

There was once that my print did not adhere to the textured PEI plate (Creality Plate B) and flew off mid print. “Grr” followed by a “tud” was heard as the 2mm PETG rod hit the back fan.

I was glad that no real damage is done. Didn't find a easy-to-install back fan protection and decided to create one myself.

This installs over the skimpy metal fan grill (that came with the Creality K1C). You can choose to install the in any orientation to have the 45 degrees opening facing downwards or towards the sides.

How I printed it

  • Material: PETG
  • Layer height: 0.20mm
  • Walls: 3
  • Fill: 15%
  • Fill Pattern: Grid
  • Support: None
  • Brim/ Raft: None
  • Top and Bottom Surface Pattern: Concentric

Tagi