Sony Xperia 1-III TPU Case & CAD Model
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A 3D-Printable Case for the Sony Xperia 1-III XQ-BC52
- Ocena
- 0 / 5
- Polubienia
- 10
- Pobrania
- 169
- Wydruki
- 0
- Wyświetlenia
- 647
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a phonecase for the Xperia 1-III, meant to be printed in TPU. The green case in the pictures is Filamentum flexfill 98A. The white one is Overture highspeed TPU 95A. Both work great. The 95A one is ofcourse a bit softer.
V24 Update 17.07.2024:
- Removed camera button in favor of a cutout
- Adjusted thickness of the volume buttons so it slicer correctly by default
(I will leave the old version online incase you want the old camera button)
V22 Update 09.07.2024:
- Moved text to the inside
- Camera button is now taller more narrow
V21 Update 08.05.2024:
- Adjusted volume button placement
- Increased clearence for prower button
I First recrated a rough CAD-model of the phone itself in Fusion360 and then drew the case around that.
The Fingerprint has a nice cutout, and the volume / assistant buttons are part of the model, all printed in one solid TPU piece. They feel surprisingly well considering that it is all one printed piece. Just make sure that it prints at least two walls on the thin sections of the buttons to avoid blobs forming from constant retractions:
The button for the camera is a seperate PLA peice.
The fancy pattern on the bottom is made with some slicer tricks:
