Liczymy pasujące modele…
Sony Xperia Z (C6602/C6603) Cover / Case Wide corners and near perfect fit. Has slightly overlapping face so the phone screen never touches surface when up-side-down.
Prints without any support material. I supplied the STEP file for the case for very easy modification in any CAD software. It fits very well on the phone, even better than “real” phone cases that I've tried. If you need any modification,…
UPDATE 2023-04-07: Added a case with a slot for a wireless charging receiver. Also hides the connector so less chance of it snagging on something and ruining your usb port. I measured roughly 400mA charging current so beware it is very…
Phone case for the Sony Xperia 1 ii, i printed it out of Filaflex TPE, the softest shore, on my prusa mini. But any TPU will do. I've included a step file so you can customize it however you like, als long as you show me your make! Don't…
Case for Sony Xperia 5 IV. Ideal to print using PLA, ASA or PETG
This is a phonecase for the Xperia 1-III, meant to be printed in TPU. The green case in the pictures is Filamentum flexfill 98A. The white one is Overture highspeed TPU 95A. Both work great. The 95A one is ofcourse a bit softer. V24…
Be gentle when snapping in your phone into this case.
Phone, Case Print instructions Recommended 82A Shore or softer. Even possible with 70A. Recreus Filament works fantastic on my Prusa! SCALE IT DOWN TO 99.5% FOR A PERFECT FIT
Simple case I made for my Sony Xperia 10 VI. Meant to be printed using TPU, I used BambuLabs TPU for AMS. Can be printed without support, at least with TPU for AMS. You can also use this as a base to add your own design/logo, see the…
I recreated my original case to protect magnetic connector( https://www.alza.cz/alzapower-magcore-plug-usb-c-3ks-d6486455.htm ) and added few tweaks.
Holder for a Sony Xperia 1 IV phone, complete with channel for a charge cable. The required cable is this one: https://www.amazon.co.uk/gp/product/B01GGKYR2O/. It might work for earlier revisions of the Xperia 1 too, I gather they didn't…
This is a bumper case made to fit the Sony Xperia 10 VI. It's a fast and easy print which uses just a little support for the button cutouts and USB port. I made this to be printed in a semi-rigid material. The one in the pictures is made…
I wanted to replace the case for my Sony Xperia V IV (seriously it is a pants naming scheme even if simple) as my old one was looking tired and damaged. Created in Onshape has gaps for all the ports and buttons, although I admit more…
Two 5ii covers one solid for the flexible filament and the other one with the opening slot for hard filament like PETG, PLA, ... Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: Yes Resolution: 0.2 Infill: 15%…
This is a model based on bernabap's GameClip: https://www.thingiverse.com/thing:43977 It holds my encased Sony Xperia Z3 (74mm wide, 10mm thick) to the PS3 controller (Dualshock 3). I placed the phone over the controller for a better…
Break my case and it's super difficult to get Sony case in my region, so decide to try make a printable version. Design to print in PETG, for the flexibility to absorb energy and minimum creep. Print using 0.2mm layer height. Top and…
At Thingiverse there is a few cases for Sony Xperia Z5, but non of them meets my expectations. This is why I have designed a new and better one. This phone case fits perfectly on phone and don't make phone much bigger. Top and bottom of…
Phone holder is open.
“ Sony Xperia 1 IV protective cover ” by goury is licensed under Creative Commons Attribution-ShareAlike . I recommend printing with a flexible filament such as TPU. I used paint on the supports for all the slits of the case. Be careful…
I just needed a temporary case to hold me over until a better one arrives. This case is printable out of PLA and will protect all of the exposed aluminium surfaces so not to scratch it. Designed to print with PLA and provides minor…
The Sony Xperia 1 II goes on preorder next week. I like the design and the specs but was unsure of the form factor. This phone has a 21:9 aspect ratio which makes it taller than most. I made this model as a stand in so I could see if it…
I couldn't find any basic case models for my Xperia XZ phone so here it is Printed with PETG, it will probably break in PLA, and TPU will give you more protection but I have not tested that yet.
Case xperia-1iv-case.stl Nozzle: 0.4 mm Layer: 0.15 mm Infill: 50% rectilinear Support: Organic support for the button holes. Filament used add-north EasyFlex black. (TPU) PLA for support Phone Model xperia-1iv-phone.stl Nozzle: 0.4 mm…
Sony Xperia 5 ii car holder for mounting on car vents. Countersunk hole for m3 bolt. Printed standing up straight due to bulge on back using supports on the bottom. Required materials m3x10 bolt m3 nut car vent clip (20mm diameter)…
This is a charging cradle for the Sony Xperia Z1. It works nicely, for me. However, I had to fix the cable in its hole using a bit of sugru. The cable is a cheap charging cable I found on ebay. (Like this one:…
The two 4mm holes are 38mm apart to fit for my old Brodit hinge. It's designed to slide in easily - for a close fitting scale down a little bit (99,5%). UPDATE Added a second version with more space for the magnetic connector Print…
Remixed my holder for use as a bike holder Category: Mobile Phone
Case for magnetic sunglasses from owndays snap series, with elastic band slot, fits over a sony xperia 10 iv wallet, Requires: 4 * m2x16 bolt 4 * m2 nuts felt/soft material to line case 150mm * 20mm elastic loop (I used 300 mm * 20mm and…
In case you're travelling in a train or bus with limited cell reception, this handy suction cup case is here to help. Just enable tethering on your mobile and attach your phone to the window, optimally in the upper part of the window and…
If your 3D printer doesnt support multi color prints or doesnt support 2mm thick walls, please print the "Phone - Printable version" which is the same model but with color details and small text missing.
A compact clamshell shell that holds a Sony Xperia XA2 Ultra and a Bluetooth keyboard in a fixed, usable geometry. The design follows the Psion Series 5 idea of a screen sitting above the keys at a readable angle, with cues from modern…
I made it in green PLA for my friend, fits perfect to his phone Print Settings Printer Brand: RepRap Printer: i3 Prusa Rafts: Doesn't Matter Supports: No Resolution: 0.02mm Infill: 15% Category: Mobile Phone
📄 Full Description: This 3D-printable desktop enclosure is designed to repurpose your old smartphone into a dedicated DIY Stream Deck, macro control panel, or PC hardware monitor . The model was custom-tailored around the Sony Xperia 10…
Enclosure designed to increase stiffness and improve aesthetics of Sony Xperia XA2 & iPega PG-9087S that I'm using as a handheld emulator. BoM: Sony Xperia XA2 iPega PG-9087S 3x M3 heat-fix threaded-insert (3mm depth) Charging the phone…
Case for magnetic sunglasses from owndays snap series, with elastic band slot, fits over a sony xperia 10 iv wallet, Requires: 4 * m2x16 bolt 4 * m2 nuts felt/soft material to line case 150mm * 20mm elastic loop (I used 300 mm * 20mm and…
This is a phone holder which perfectly fits Sony Xperia Z3 compact. Printed solid with PETG you can just snap in the phone. It cannot fall out by itself but you can easily grab and use the phone while in the holder. Nevertheless it is…
Case xperia-1iv-case.stl Nozzle: 0.4 mm Layer: 0.15 mm Infill: 50% rectilinear Support: Organic support for the button holes. Filament used add-north EasyFlex black. (TPU) PLA for support Phone Model xperia-1iv-phone.stl Nozzle: 0.4 mm…
Best to Print in TPU, I like to do 2 top and bottom layers so you can see the infill. You will need supports and have to cut them off the finger strap but it's not the worst.
The smartphone back should be glued to the silicone cover. Step file to change the letter of the name
This is a phone holder which perfectly fits Sony Xperia Z3 compact. Printed solid with PETG you can just snap in the phone. It cannot fall out by itself but you can easily grab and use the phone while in the holder. Nevertheless it is…
I needed a cover for my sony xperia x compact phone. So here it is. My print quality for the bridges with TPU are not so great, but for me it is every day usable… Perhaps your TPU is better tuned in ;-) You can show me your results in the…
Made in onshape. Can be printed as a full case, or with the frame. The backside part can be used as a modifier to make different patterns with infill on the back (i.e. for ventilation or grip). Printed with Elegoo CC. It fits very well.…
Best to Print in TPU, I like to do 2 top and bottom layers so you can see the infill. You will need supports and have to cut them off the finger strap but it's not the worst.
Just a simple holder for already a bit old Sony Xperia 5 II model. I utilize this old phone for system monitoring. I used PLA 0.2mm layer no support no brim
A simple wall mount for the Experia Box v12(b) router/modem, with holes for two 4mm screws. I probably could use some improvements (Please let me know! Since this is the first 3D model I made, and open therefore open for feedback to…
Remixed this phone case to be a full cover decorated with encounter of various degrees. ALIENS ARE REAL. Keep on rocking in the free world. DooDooladoopdoop. Print in flexible materials, no supports. 100% infill if you want a tough…
Simple tpu phone case for the Sony Xperia One mobile phone. I used supports around the bottom bevel and in the port/ button holes Print Settings Printer Brand: Anycubic Printer: All-metal Mega Rafts: No Supports: Yes Resolution: 100…
Fits my Sony xperia Z3, printed and used (sorry no photos) Customized version of http://www.thingiverse.com/thing:426872 Created with Customizer! http://www.thingiverse.com/apps/customizer/run?thing_id=426872 Instructions Using the…
Took the Xperia holder from Sony Xperia Z3 Mount For Playstation Dualshock 4 and added the screw from [Galaxy S4 Tripod Mount].( http://www.thingiverse.com/thing:137118 ) So now You have a nice tripod mount for your Xperia Z3. EDIT: Fixed…
Remixed it to fix the gaps on the side buttons and add some thickness and a design. Big thank you to the original designer, Dominik Chuchlík . If you don't want the design, just slice off the bottom 2mm from the file, that will get rid of…
use any filament you like, simple print, not much overhang so you can use tpu etc. looks nice with concentric bottom if you like some modifications i can make them
I have adapted the holder to an Xperia Z3 Plus. Now the smartphone with shell and these dimensions 148mm x 73,5mm x 9,5mm fit into. With ABS Glue I fixed the 3 pieces. Very nice holders. Simple but it works. Thanks to siGurd87 Print…
Brodit ProClip compatible mount for Sony Xperia 1 II and III Can be printed flat. The fit is a little loose. Category: Mobile Phone
Case for Sony Xperia XZ1 Compact. Disclaimer: I had issues slicing this model with Cura - it seemed to have problems with the thin 0.8 mm walls. Slic3r handled it just fine though. Double checking the layers before printing might still be…
I've lost two phones in one year due to drops, so I really liked the design of this grippier case. I disabled bottom layers and used hexagon infill on the back to have even more grip. The one feature I couldn't live without though was…
External dimensions 82.000, 11.000, 165.000 mm
Remixed of the original to fit a Sony Xperia SP. The phone is 68mm wide with no case and I've used 63.5mm in constrain33 for a snug fit. Could be easily adapted to any phone if you do the math. Category: Sport & Outdoors
Phone dock for XZ1 with case. clamping it to something so you can put on and pull off with one hand. Dock is split in half to accommodate the cable, then the C-Clamp holds it together while the desk clamp holds the whole thing to the…
Warning: I don't use Google assistent button, so i didn't make a hole for it.
This is a model of a phone bumper for Sony Xperia 5 IV Designed to be printed with PLA, 0.4 nozzle, 0.16 layer height.
P1S Touchscreen/Phone Mount for P1S Printer Designed to Mount a Sony Xperia Z3 to the P1S Printer Optionally Connects to the Internal USB Port for Charging Two Variants Available: Xperia Z3 with Protective Case Attached Xperia Z3 without…
I changed the case a bit so the flash and other sensor with it are not covered
It is a case for Sony Xperia 5, Its a remix of Sony Xperia 10 iii XQ-BT52 case by ShelXle.
