zwZ5Case – Sony Xperia Z5 Case
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
At Thingiverse there is a few cases for Sony Xperia Z5, but non of them meets my expectations. This is why I have…
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 37
- Wydruki
- 0
- Wyświetlenia
- 275
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Portable Devices
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
At Thingiverse there is a few cases for Sony Xperia Z5, but non of them meets my expectations. This is why I have designed a new and better one.
This phone case fits perfectly on phone and don't make phone much bigger. Top and bottom of phone is opened to allow access them by bigger connectors and docking station. All edges that can be touched by finger are rounded.
I have printed it in to colors for better effect. I also have published two different versions of case:
- first one have all logos from phone copied to case, this require printer with great resolution to print all details,
- second one have only side logo so whole back side is blank.
When printing please look closely at my printer settings to get same result as me. Your printer need to be good calibrated.
Print Settings
Printer Brand:
FlashForge
Printer:
Creator Pro
Rafts:
No
Supports:
No
Resolution:
0.2mm
Infill:
100%
Notes:
This print is optimised for layer height 0.2mm (in this way you can be sure that inner size exactly meet phone dimensions) and 0.4mm nozzle (all walls are exactly 1.2mm thick). Please remember that layer height is very important. If set to other value phone probably can't fit. Don't need to set dimensional adjustments.
Supports are not required if your printer supports bridging for buttons.
Category: Mobile Phone