1 / 3
Hauck chair taller pads/feet (vacuum robot compatible) — zdjęcie 1
1 / 3

Hauck chair taller pads/feet (vacuum robot compatible)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Feet for the "Hauck" chair (tiltable model) to increase height to make vaccum robot compatible

Ocena
0 / 5
Polubienia
5
Pobrania
23
Wydruki
0
Wyświetlenia
177
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Kitchen
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Feet for the "Hauck" chair (for the tiltable model) to increase height just enough that our beloved vaccum robot (Roborock) can move under it from all directions. You can simply pull out the old ones with plyers. The large ones on the front just plug in with no tools needed. The ones on the back require at least one skrew. I just used two (I didn't know at design time that the small one also at a pin)

Tagi