Liczymy pasujące modele…
There are already some models on Printables to store Trofast baskets under a Hauck highchair, but I don't like their design. Most of them either look bulky, waste much filament, don't allow to use it as a drawer or require unnecessary…
We are using the Hauck Alpha highchair and my wife wanted to use the IKEA Trofast with it (she saw the “hack” on the Stokke highchair). Initnially we used this print:…
I changed some sizes to use a Trofast at the bottom rail of the chair
Der Halter besitz eine kleine Kerbe, damit die Schale nicht verrutschen kann.
Replacement hinge joint for the Hauck Stop N Safe Safety Gate. As the original (and in my case broken) hinge joint has an obvious design flaw (cf. "planned obsolescence), I took the liberty of designing this reinforced version. Happy…
Auch wenn es bereits einige Vorlagen zur Befestigung der Trofast Box am Hauck Hochstuhl gibt, war keine für uns optimal. Die Box kann so nicht herausgeschoben werden und liegt durch die Führung stabil auf der Schiene. Die Druckdatei habe…
Eine alternative Babyphone Betthalterung für das Babyphone Philips Avent SCD845/26. Sollte die V.1. einen zu steilen Winkel haben kann diese an der ggü. Seite des Babybettes installiert werden. See also my other bed mounts:…
Replacement for the upper hinge of the door of the Hauck safety guard for stairs and doors. Print sideways like in the photo so the force is not with the layer lines otherwise it will break very soon like the original part.
Attachment for a Trofast basket to click into place. Each variant is needed twice and clicked into the corners of the Trofast basket. The entire part is then hung in the lower part of the Hauck children's chair. The parts are held using…
I have purchased the Hauck Clear Step Autoclose 2 door safety gate. Unfortunately, the door cannot be locked when it is open. That's why I created this simple lock. It works very well for me.
The yellow part is broken. I tried to glue it together but it lasts not very long so I rebuilt it with Fusion360.
A symmetrical rail to apply on both sides of the Hauck chair. Then you can simply slide a Trofast box in and use it for storage. We have a model with wheels on the back so you can roll the chair around. To prevent the box from falling out…
Wir hatten uns zuerst Adapter gekauft, um unter unserem Hauck Hochstuhl Trofast Boxen zu befestigen. Doch die waren zu locker und nicht stabil genug – die Boxen hielten einfach nicht richtig. Also habe ich eigene Adapter entworfen: sie…
Looking for a versatile solution for your wheelchair or robot vacuum? Check out the Hauck Stop N Safe ramp! Designed with flexibility in mind, this ramp features bone connectors, mid pieces, and end pieces, allowing you to customize it to…
This is an accessory for the Cafelat Robot Espresso Maker. It is used to hold the arms up when attaching the portafilter: Here is a link to the Cafelat Robot Espresso Maker: https://www.cafelatstore.com/products/robotpowdercoating The CAD…
A simple wall bracket to use with Hauck Stop n Safe 2 babygate (but will probably be easy to scale up/down for other babygates). The cup needs to be secured to the wall with doublesided tape. The babygate has round pushers that fit inside…
Lock nut replacement used for Hauck Children Safety Gates' tensioning screw system
Replacement hinge for Hauck Open N Stop
The default Hauck spring lock is a plastic part which can easily break. This model can be printed to replace that broken part.
i have two gates but only four original screws and i didn't want to drive to the hardwarestore, so i drew and printed these. the yellow one are made of nobufil petg and are very sturdy. the white ones are some pla+ and i don't really…
Feet for the "Hauck" chair (for the tiltable model) to increase height just enough that our beloved vaccum robot (Roborock) can move under it from all directions. You can simply pull out the old ones with plyers. The large ones on the…
🇩🇪 Unser Hauck Treppenhochstuhl Alpha hatte einen sehr harten und kratzigen Plasitkfuss der unseren Laminat ganz schön strapazierte. Deshalb habe ich mit Blender einen neuen entworfen und mit TPU gedruckt. Die Füße lassen sich ohne…
Unfortunately, the original wheels on our Hauck high chair quickly became unsightly. The material chosen by Hauck was not very durable. I therefore developed new wheels. As this is a safety-relevant component, use at your own risk. Test…
Upgrade your Hauck High Chair with smart storage that doesn't block your robot vacuum! This functional 3D printable adapter perfectly connects an IKEA Trofast bin to your Hauck wooden high chair. What makes this design special? It…
Pièce de rechange pour la fermeture inférieure de la barrière Hauck.
We needed a high Foot for our Hauck Baby Bouncer. Use at your own risk, the bouncer is not as stable as before. It can and most likely will tip over. You need two screws and nuts.
Pre supported. Require pause to insert 25mm hex screw and continue print. At least 5 outer walls and 30% infill.
This is an accessory for the Cafelat Robot Espresso Maker. It is used to make the arms more comfortable when pulling a shot: Here is a link to the Cafelat Robot Espresso Maker: https://www.cafelatstore.com/products/robotpowdercoating The…
Da bei unserem gebrauchtem Hauck Neugeborenenaufsatz & Wippe 2in1 für Alpha Hochstuhl / Bouncer ein Silikonfuß fehlte habe ich diesen hier nachdesingt und in TPU gedruckt. Passt evtl auch bei anderen Modellen, die einzelnen Stangen der…
What Is It For I bought a gate to keep my rabbit in the livingroom and the opening was too wide for the gate's 800mm adjustment so I came up with this. This adds 70mm of width and I ended with two so I can keep the adjustment screws in as…
The original can't stand anything.
Tittle thing that might come in handy. We used to have a Hauck Beta+ chair. It's fine, but food residue gets into the seat belt groove and is difficult to clean. This might help a bit ;) (Reuploading from Thingiverse.)
Um das Schutzgitter von Nhauck an der Treppenwand zu befestigen habe ich dieses 3D Model erstellt. Leicht zum einklicken und bei bedarf ausklicke. Ges. Länge: 45 mm Ges. Breite: 40 mm
Bill of Materials: m4 inserts m4 screws (don't worry about size, if it works it works) washers I've printed in ASA so its able to be outside. The filament needs to flex to go around the cart structure.
Um das Schutzgitter von Nhauck an der Treppenwand zu befestigen habe ich dieses 3D Model erstellt. Leicht zum einklicken und bei bedarf ausklicke. Ges. Länge: 45 mm Ges. Breite: 40 mm
Bill of Materials: m4 inserts m4 screws (don't worry about size, if it works it works) washers I've printed in ASA so its able to be outside. The filament needs to flex to go around the cart structure.
This is an accessory for the Cafelat Robot Espresso Maker. It is used to make the arms more comfortable when pulling a shot: Here is a link to the Cafelat Robot Espresso Maker: https://www.cafelatstore.com/products/robotpowdercoating The…
