Hauck chair Trofast rail
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A rail to use a Trofast box for storage below your Hauck chair
- Ocena
- 5 / 5
- Polubienia
- 6
- Pobrania
- 76
- Wydruki
- 2
- Wyświetlenia
- 542
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
A symmetrical rail to apply on both sides of the Hauck chair. Then you can simply slide a Trofast box in and use it for storage. We have a model with wheels on the back so you can roll the chair around. To prevent the box from falling out I added a little latch that can simply be skrewed to one or both of the sides of the rail.
In general its a very tight fit to push it into place. I wanted it that way so it would never come loose by accident. But you have been warned, so if you want to be safe you can scale it down in the z-axis by 2%.
The picture is actually an old version. In the current version the upper rail is bent upwards to make the box slide in easier.
Recommended printing settings:
- Filament: PETG (Pla should be no problem though)
- Best results if printed in upright position
- No supports needed
- 0.3 layer height
- 3 perimeters