1 / 2
Hauck Baby Door Screws
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Made a replacement for the screws of my gates that keep my son from escaping all the time. CAUTION: USE AT YOUR OWN RISK
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 34
- Wydruki
- 0
- Wyświetlenia
- 154
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
i have two gates but only four original screws and i didn't want to drive to the hardwarestore, so i drew and printed these.
the yellow one are made of nobufil petg and are very sturdy. the white ones are some pla+ and i don't really trust them..
CAUTION:
- make sure to only use them on the lower end of the gate. if the upper screws fail the door can fall on your toddler/dog/pinkytoe!
- never use them, if there are stairs behind the gate.
- USE AT YOUR OWN RISK
- make sure to use good filament of a brand you trust