Flat top Keycaps (MX Cherry) with cutouts for M2.5 screw head
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Some positions required cutout in keycap to avoid screw head on my new custom keyboard.
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 36
- Wydruki
- 0
- Wyświetlenia
- 401
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Share Alike
My modified stl file holds 12 keycaps and 8 of those are modified with cutouts. Other keycaps were printed from the original STL file. The example in the photo were printed on a FDM printer with 0.2mm layer height. I am reprinting the keycaps with a 0.12mm layer height to get better quality. The existing keycaps do work.
- print top side down to avoid supports
The case for the keyboard can be found here:
https://github.com/danpeirce/scad-keyboard-cases?tab=readme-ov-file#corne-inspired-keyboard-case-modified-to-use-a-raspberry-pi-pico
The custom firmware I am using for the keyboard can be found here:
As of March 17, 2024 I have a working left side of my pico-corne keyboard and am building the right side. In the mean time I am using a standard US keyboard with my right hand and my new custom pico-corne with my left hand as I type this.