Flat top Keycaps (MX Cherry) with cutouts for M2.5 screw head
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Some positions required cutout in keycap to avoid screw head on my new custom keyboard.
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 36
- Makes
- 0
- Views
- 401
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution — Share Alike
My modified stl file holds 12 keycaps and 8 of those are modified with cutouts. Other keycaps were printed from the original STL file. The example in the photo were printed on a FDM printer with 0.2mm layer height. I am reprinting the keycaps with a 0.12mm layer height to get better quality. The existing keycaps do work.
- print top side down to avoid supports
The case for the keyboard can be found here:
https://github.com/danpeirce/scad-keyboard-cases?tab=readme-ov-file#corne-inspired-keyboard-case-modified-to-use-a-raspberry-pi-pico
The custom firmware I am using for the keyboard can be found here:
As of March 17, 2024 I have a working left side of my pico-corne keyboard and am building the right side. In the mean time I am using a standard US keyboard with my right hand and my new custom pico-corne with my left hand as I type this.