1 / 1
Desk drawer — zdjęcie 1

Desk drawer

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Drawers to be mounted from underneath a desk. They are available in 3 versions with varying lengths; 240, 220 & 200 mm

Ocena
5 / 5
Polubienia
55
Pobrania
346
Wydruki
3
Wyświetlenia
1621
Oceny
3

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Organizers
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Desk drawer to be mounted from underneath the desk.
There are three versions with varying lengths available

LxWxH (inside):

  • 240 (219) x 200 (174) x 50 (45) mm
  • 220 (199) x 200 (174) x 50 (45) mm
  • 200 (179) x 200 (174) x 50 (45) mm

Each version have their own corresponding mid- and end brackets. The mid brackets have guides on both sides allowing several drawers to be mounted alongside on another. The end brackets have a guide on only one side leaving the other blank for a nicer finish. All mounts and drawers are compatible with one another so they can be mixed. 

The mounts have Ø4.5x34mm with a ø8.5x3mm counterbore. The screws I use are 40mm long with a regular pozidrive head. The majority of the screw is hidden in the 3D print so an electric screwdriver can reach the head - that wouldn't be possible with a large counterbore hole. It probably could have been deeper though.

I have not made mirrored end brackets. THEY NEED TO BE MIRRORED IN THE SLICER. I'm lazy like that.

The larges drawer just fits on a Prusa mk4 with space for a 5 mm brim if needed. The I designed the smaller versions as I forgot to take into account a cable tray underneath my desk.. 

Photos coming once i'm done printing. If I remember.

NB: The pokey things in the thumbnails/assembly are just quickly modelled screws.

Tagi