Unwrapped Icosahedron
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is the 2D net of an icosahedron or a 3D icosahedron unwrapped. I then added in the equivalent volume for each…
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 16
- Wydruki
- 0
- Wyświetlenia
- 300
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Art & Designs
- Licencja
- Creative Commons — Attribution
This is the 2D net of an icosahedron or a 3D icosahedron unwrapped. I then added in the equivalent volume for each segment of the relative part so it can become a solid 3D object again. This is designed to have fabric inserted into the part, which acts as a hinge.
Print Settings
Printer Brand:
Anycubic
Printer:
Kossel
No
Supports:
No
0.1
Infill:
25
Filament:
any PLA any
Notes:
When printing on fabric do not use a raft unless you must. The bonding between the fabric and printed material can be weaker than the connection to the raft.
When placing material I used a low tack, repositionable, spray adhesive. You can find this in any craft store.To get a good bond make the base 6-8 layers thick and place the sheet between layers 3-5. If you use multiple sheets leave at least two printed layers between the fabric for improved results but your experimenting may prove different. Enjoy.
Category: Math Art