Unwrapped Icosahedron
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is the 2D net of an icosahedron or a 3D icosahedron unwrapped. I then added in the equivalent volume for each…
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 16
- Makes
- 0
- Views
- 300
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Art & Designs
- License
- Creative Commons — Attribution
This is the 2D net of an icosahedron or a 3D icosahedron unwrapped. I then added in the equivalent volume for each segment of the relative part so it can become a solid 3D object again. This is designed to have fabric inserted into the part, which acts as a hinge.
Print Settings
Printer Brand:
Anycubic
Printer:
Kossel
No
Supports:
No
0.1
Infill:
25
Filament:
any PLA any
Notes:
When printing on fabric do not use a raft unless you must. The bonding between the fabric and printed material can be weaker than the connection to the raft.
When placing material I used a low tack, repositionable, spray adhesive. You can find this in any craft store.To get a good bond make the base 6-8 layers thick and place the sheet between layers 3-5. If you use multiple sheets leave at least two printed layers between the fabric for improved results but your experimenting may prove different. Enjoy.
Category: Math Art