Skådis headphone mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Get more deskspace by hanging stuff on your walls instead! This headphone mount has elegant curves and no cable hooks.
- Ocena
- 0 / 5
- Polubienia
- 15
- Pobrania
- 52
- Wydruki
- 0
- Wyświetlenia
- 422
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This headphone hanger uses a subtly curved design and exported at an overly high resolution for a smoother curve to avoid adding bumps into the headband.
The three holes have a decorative relief for an ifixit screwdriver and can accomodate even the shortest of bits! Design oversight? Nooo..
I added a thin cut into each of the grooves so the slicer adds additional material here to improve the strength of the part.
The unit has three holes with a 20mm gap to accomodate a two, or one hole mounting option.
The divots above and below the holes are for indexing and uses bamboo Q-tips for pegs, cut to length after inserting.
The M3 countersunk bolts used are 14mm long and goes through the entire length of the t-nut.
The unit is mounted to the pegboard with T-Nuts provided by @6d6178 and @SamuelHaberli_587722 for the M3 variant used