Skådis headphone mount
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Get more deskspace by hanging stuff on your walls instead! This headphone mount has elegant curves and no cable hooks.
- Rating
- 0 / 5
- Likes
- 15
- Downloads
- 52
- Makes
- 0
- Views
- 422
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This headphone hanger uses a subtly curved design and exported at an overly high resolution for a smoother curve to avoid adding bumps into the headband.
The three holes have a decorative relief for an ifixit screwdriver and can accomodate even the shortest of bits! Design oversight? Nooo..
I added a thin cut into each of the grooves so the slicer adds additional material here to improve the strength of the part.
The unit has three holes with a 20mm gap to accomodate a two, or one hole mounting option.
The divots above and below the holes are for indexing and uses bamboo Q-tips for pegs, cut to length after inserting.
The M3 countersunk bolts used are 14mm long and goes through the entire length of the t-nut.
The unit is mounted to the pegboard with T-Nuts provided by @6d6178 and @SamuelHaberli_587722 for the M3 variant used