1lb Antweight Combat Robot
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
1lb, 3D printed, antweight, combat robot.
- Ocena
- 5 / 5
- Polubienia
- 67
- Pobrania
- 675
- Wydruki
- 0
- Wyświetlenia
- 3344
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Sports
- Licencja
- Creative Commons — Attribution — Noncommercial
I've used this 1lb, 3D printed, Antweight combat robot for the last year or so at local events. At our events, in the 3D printed class, all external parts, including the weapon, must be printed out of PLA, PLA+, PETG, TPU, ABS, or ASA. So this is designed within those constraints. If you use this at an event that allows TPU, print the armor out of that, otherwise, print it out of something allowed by the rules.
In addition to the printed parts, you will need the following components and electronics:
5010 brushless motor
Brushless ECS of at least 30 amps
38mm diameter wheels that are approximately 10mm wide, if you use the included hub, the diameter of the hub is 25.4mm
Brushed speed controller
2 N20 DC gearmotors
Receiver
2s or 3s Lipo battery, recommend 3s
Power switch of some kind