Liczymy pasujące modele…
This is an open-source Plastic Antweight combat robot, intended for the SCAR component kits available from Turnabot and Team Malice. This and other community designs can also be found on the Team Malice website . It placed 4th overall at…
A tribute to Bite Force, one of the top Battlebots of all time. I have included the STEP and F3D files so you can change up anything you like. Hex standoffs were 6/32 thread, .5" long. Motors are Servo City N20. Weapon motor and most…
500g(1lb) Silica Gel Desiccant Box (Updated October 2019 with 1mm thicker sides to make it stronger and easier to print) Box to contain 500g of colour indicating silica gel for your filament dry box. The dimensions without feet are 155mm…
I've used this 1lb, 3D printed, Antweight combat robot for the last year or so at local events. At our events, in the 3D printed class, all external parts, including the weapon, must be printed out of PLA, PLA+, PETG, TPU, ABS, or ASA. So…
Updated V2! I've finally uploaded some long overdue changes to make assembly easier and make the robot more durable than before! Some Patch notes: Updated design to use all M3 bolts and nuts included in the linked BOM. (no more fiddly…
Since I already had my favorite Battlebot (Bite Force), I wanted to make his rival Tombstone. Please be careful, the weapon blade is much larger and more dangerous on Tombstone that it is on Bite Force. Only spin it up in a testing box…
A cap for a one pound propane cylinder, used to keep it clean and protect the treads. It should be printed in TPU and without supports.
Break Check is a 1lb plastic combat robot design for the WPI plastic ant tournament. Required electronics: 2x repeat brushed mk2 3mm shaft 1x A2212 Brushless motor 10mm eva foam for the wheels (Or other material, Ive had good luck with…
This is technically a remix of the gorgeous Mini Son of Whyachi by Pinfari13. I used their model as a guide for the correct scale/sizing of the main body. I have included the Fusion 360 file so you can edit it all you want. I have also…
Made this for a heater that attaches to a Coleman 1lb propane tank. Without the stand, the slightest nudge would make it fall over. With the stand, it can be smacked around and will stay upright. Printed in PETG, no supports, 15% gyroid…
Hubby needed a base for a 1lb Coleman propane bottle. I just did a little math and increase the original file in size by 1.36. Category: Outdoor & Garden
Simple pegboard holder for 1lb Harbor Freight Pittsburgh-branded dead-blow hammer. Since Harbor Freight tools are usually a crappy copy of some better tool manufacturer's design, it's very likely that other 1lb dead-blow hammers will fit…
Printed First Measure After 1lb Plastic Ant This is a 1lb Plastic Ant that was made for use in Combat Robotics. I have been developing this robot for around 2 years now. Before I retire from Robotics and the internet for 2 years, I want…
I found this cap, which is pretty much perfect. https://www.thingiverse.com/thing:3164779 I also found this plug, which is cool, but not easily removable. https://www.printables.com/model/25391-1lb-propane-discharge-plug I decided to…
WARNING: Hold the center piece while fitting the top on. I was forcing the top on the third one I've printed and the center piece broke. I was holding the base when it happened. I may add some tolerance to the connection to make it…
11Lb Spool Adapter for smaller Lincoln Welders. Will probably fit other welders. Category: Tools
Holder for Harbor Freight 1lb dead blow hammer. Remixed the original pegboard model by removing pegs and adding holes to screw into wall. The holes are on the small side, you can enlarge with a drill if you have larger screws.
Remix to support a 1lb spool of solder from Kester. The only supports needed are for the axle -Fixed axle not being symmetrical Print Settings Printer: Voron Rafts: No Supports: Yes Resolution: 0.2mm Infill: 40% Filament: Sparta3D ABS+…
designed to fit a Coors or Miller aluminum bottle. I made a series of these for a fishing trip where everyone tended to misplace their beer. print in your team colors to keep all arguments centered around what's truly important. Obviously…
The Gridfinity bug is alive and thriving in my shop, so here is just another piece to the puzzle. Here are a smaller set of bins that together hold a generic brand 1lb dead blow hammer. The top side is 2x3, and for the bottom there are…
Measuring tool when you threw the wrapper out, 123 X 30 X 2mm. I printed in PLA, 2.0mm 20% infll it use 8.79g of filament.
Two 1lbs coleman green canister holder. With two hook loops on the sides to hook and secure it or if you wanted to put multiples the loops should help secure them to each other with a bungee or some rope.
Abrelatas is my 1lb combat robot, built in 2023 for the robot combat tournament at OSHWDem . It’s a 4-wheel drive vertical spinner, mostly 3D printed. It’s a fairly simple build, there’s no microcontroller onboard. Everything is directly…
1lb. Solder Spool Holder About This holds a 1lb spool of solder. Specifically made to fit product: KESTER SOLDER 24-6337-0027 Solder Wire, 63/37 SN/PB, 183°C, 1LB but should fit most spools. Requires two 608 bearings Printing tips: parts…
1lb combat robot inspired by Hal Rucker's DUCK! Print instructions Duckling build guide BILL OF MATERIALS Description qty source Notes M3x20 cap screw 12 https://www.mcmaster.com/91280A116 One package 30:1 gear motor 6…
A simple plug to maintain equalized pressure in waste Coleman-style 1lb propane tanks. NOTE: Installing this cap may or may not allow you to dispose of these waste items in your normal disposal stream. Consult your local waste authority.
This is my second attempt at robot combat: The BAMboozler hits hard and can take a beating. Strengths: Massive weapon - It ended up being about 40% of our robot's total weight and at one point broke a competitor's robot in half. The…
My speedbuild spare parts ant vert, competed under the name Capella. It got 4th and then 3rd at a local combat robotics event. Everything is printed out of TPU except for uprights (high speed TPU) and the top plates (PLA+ or carbon…
Are you sick and tired of refilling the coffee beans in your Saeco Vienna coffee maker every few days? If so, then you need this super mega hopper extender, to allow for a full pound of coffee beans to fit, enabling almost-limitless…
Holds a Kester 1lb solder spool for easy use.
As the name implies, this spindle has collapsible hooks to facilitate quick change of filament spools. Print instructions Category: 3D Printer Accessories Summary As the name implies, this spindle has collapsible hooks to facilitate quick…
Holds two standard 1lb propane bottles (Coleman style) upright and prevents them from rolling. Designed for drawer or cabinet storage, originally made for an RV, but works anywhere you want to keep small propane bottles organized and…
Holds a 1LB propane tank and solder
Spool holder for the Kester Solder 63/37 1lbs spool. https://www.amazon.com/gp/product/B004X4L076/ Uses zz608 bearings for the spool. Wrapping the eyelet with some foam can help prevent the solder from moving to easily through the holder.…
1lb printable plates for fractional/micro loading an Olympic (2") bar. The 3d rendering preview on printables looks odd because it's displaying negative space as positive space. Mine came out slightly light (as shown), but that's well…
If you own a Titanium MIG 170 and your 11lb spool adapter is missing or broken, you already know Harbor Freight doesn't sell replacements. Designed from scratch after opening a used machine that came without the adapter. Every dimension…
COMBAT ROBOT IS STILL IN PROGRESS, ALL FILES ARE NOT FINAL! I HAVE NOT FINISHED DESIGNING IT! IF SOMETHING DOES NOW WORK, PLEASE COMMENT AND TELL ME WHAT IS WRONG, I WILL TRY TO FIX IT! THANK YOU! This is my 1lb Plastic Antweight named…
This is a design that I recently finished, meant to imitate the 3lb combat robot Cattywampus, designed and built by Brandon Young. Part's List: Malenki Nano (or 5AX2 & Small 4 channel receiver combo) 2s battery (300mah approximate) 2x n20…
I was mixing some tannerite up the other weekend and realized its hard not to spill. Couplers between bottles exist, why cant there be one for these 3.5" specimen jars? So, I made one. Print. Remove caps. screw the two together, mix,…
This is an extended axle designed to fit with Hideout Hobbyist's 65mm spacing solder spool holder remix. This remix does not include an extended axle to go with the extended spool holder base so I made one. Just print this axle instead of…
This is file number 4 in this collection. This is the wedge for Chonk! as he competed in Hickory Bot battles in 2021, he didn't win a lot but man we had fun! Use these n-20 motors:…
Customized version of http://www.thingiverse.com/thing:44906 Created with Customizer! http://www.thingiverse.com/apps/customizer/run?thing_id=44906 Instructions Using the following options: unit = 1 spool_hole_diameter = 18 spool_width =…
---------- Printing ----------- Body . . . 1x Lid . . . . . 1x These are the largest parts and make up the main structure of the project. Front Wedge . . . 1x Back Wedge . . . .1x You will need only two wedges in total (one front, one…
Electronics used in STAG V4
Pulled my new Taulman 910 out of my filament dryer and put it up to the stock spool arm only to find it didn't fit. There are other options out there, but my printer's location doesn't allow for spool holders that sit on a flat surface. I…
A spool holder for very small spools. Prints without supports ! Due to the bayonet mount I had to get creative, so this is a print in place model. Print it in the file orientation. When printed, the main shaft will slide through the…
I make shelves for propane and propane accessories, I tell you what. This is a storage caddy/shelf to hold a 1lb green propane bottle. This model was made to work with Multiboard, and attaches using the supplied "small, coin slot,…
I own a Skywalker Coffee Roaster, the opening to load the coffee into the chamber is kind of tiny. I designed this tray to make the roasting process a little bit easier. If you want, there is a filament color change on the last couple of…
Two 1lbs coleman green canister holder. With two hook loops on the sides to hook and secure it or if you wanted to put multiples the loops should help secure them to each other with a bungee or some rope.
Holds two standard 1lb propane bottles (Coleman style) upright and prevents them from rolling. Designed for drawer or cabinet storage, originally made for an RV, but works anywhere you want to keep small propane bottles organized and…
This is a gridfinity compatible 2x2 kester solder holder. The solder rolls perfectly when pulled and stays put on the grid. I have very sloppily optimized the bottom to use less filament. I inpainted a thin cross of support material on…
I wanted something to keep my work area tidy, but have a little fun too. My day job is as a rail engineer. So I modeled an organizer in the shape of 141lb rail to keep everything I use on a regular basis close at hand. The blue stripe…
Print in a material safe for outdoors, I used PETG, but any spacing and use an infill over 15% and you should be good.
I made these to help protect the threads and connectors from being abused as they get tossed about in life.
