11lb Wire Spool Adapter for Titanium MIG 170 (Harbor Freight)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
11lb spool adapter for the Titanium MIG 170. Harbor Freight doesn't sell it separately — now you can print one.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 21
- Wydruki
- 0
- Wyświetlenia
- 67
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Share Alike
If you own a Titanium MIG 170 and your 11lb spool adapter is missing or broken, you already know Harbor Freight doesn't sell replacements.
Designed from scratch after opening a used machine that came without the adapter. Every dimension was measured directly from the welder stud and an actual 11lb spool, not based on guesswork or reverse-engineered from photos.
It slides over the existing stud and uses the same keyed washer, spring, and wingnut that came with the welder - nothing extra needed. The locating nub engages the spool's positioning hole so the adapter spins with the spool instead of inside it. Internal ribs keep it from flexing under the weight of a full spool.
Printer settings (using Orca):
Material: Elegoo Rapid PETG
Nozzle Temp: 260°C
Bed Temp: 75°C
Layer Height: 0.2mm
Wall Loops: 4
Infill: 15% Honeycombe
Nozzle Size: 0.4mm
Supports:
Type: Tree (auto)
Style: Tree Hybrid
Top interface layers: 3 (helps create ideal-ist surface when supports are removed)
Tree support branch angle: 20 (helps break supports away easier)
Filament: ~70g