11lb Wire Spool Adapter for Titanium MIG 170 (Harbor Freight)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
11lb spool adapter for the Titanium MIG 170. Harbor Freight doesn't sell it separately — now you can print one.
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 21
- Makes
- 0
- Views
- 67
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Share Alike
If you own a Titanium MIG 170 and your 11lb spool adapter is missing or broken, you already know Harbor Freight doesn't sell replacements.
Designed from scratch after opening a used machine that came without the adapter. Every dimension was measured directly from the welder stud and an actual 11lb spool, not based on guesswork or reverse-engineered from photos.
It slides over the existing stud and uses the same keyed washer, spring, and wingnut that came with the welder - nothing extra needed. The locating nub engages the spool's positioning hole so the adapter spins with the spool instead of inside it. Internal ribs keep it from flexing under the weight of a full spool.
Printer settings (using Orca):
Material: Elegoo Rapid PETG
Nozzle Temp: 260°C
Bed Temp: 75°C
Layer Height: 0.2mm
Wall Loops: 4
Infill: 15% Honeycombe
Nozzle Size: 0.4mm
Supports:
Type: Tree (auto)
Style: Tree Hybrid
Top interface layers: 3 (helps create ideal-ist surface when supports are removed)
Tree support branch angle: 20 (helps break supports away easier)
Filament: ~70g