Spool Winder Fixing Brackets
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Fixing Brackets for Spool Winder main Body
- Ocena
- 5 / 5
- Polubienia
- 47
- Pobrania
- 278
- Wydruki
- 2
- Wyświetlenia
- 2428
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial
Done for myself, but maybe someone will find this helpful as well.
Story is simple. As I wanted to put my printed winder on plank, I found that somehow main body doesn't have a screw holes or anything else to fix it on surface (donor body have 4 holes). So I Made a quick simple Bracket model to fix that. Probably a bit overkill and smaller one is enough, not sure, you can try :)
Brackets are made to be used with 3.5mm screws. Holds strong.
So if you faced the same problem as me, then take it and enjoy :)
You can Buy me a coffee if You feel good doing so :)
https://www.buymeacoffee.com/warlogh
(And very big Thank You For interest in my work)