1 / 6
Seatstay Mount for Bontrager Flare R City Tail Light on Trek Checkpoint (Second Generation 2022+) — zdjęcie 1
1 / 6

Seatstay Mount for Bontrager Flare R City Tail Light on Trek Checkpoint (Second Generation 2022+)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This is a mount to put a Bontrager tail light on a second generation Trek Checkpoint fender mounting location.

Ocena
0 / 5
Polubienia
3
Pobrania
45
Wydruki
0
Wyświetlenia
596
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Share Alike

This model is for a second generation Trek Checkpoint (2022+).  I created a mount for the first generation Checkpoint here https://www.printables.com/model/160973-fender-mount-for-bontrager-flare-r-city-on-trek-ch

I printed it with the release tab pointing up, flat side on the bed, no supports.  I find that black ABS with a 0.3mm layer height works really well.  Once the print is done just take it off the bed.

I had to get screws from the shop I bought the bike from to mount it, M5 bolts work well, my Checkpoint came with rubber plugs in the mounting boss.  The screws that I did have in the downtube were too long to actually clamp without bottoming out on the opposite side of the seat stay.

Aside from that hiccup, mounting is just a matter of bolting it to the bike and snapping the light into place.

Tagi