#0137 V2 Flexible Fabric Tape Winder (Spooler) - Spiral Pattern
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
An easy and quick 2-part print that snaps together. No hardware needed.
- Ocena
- 5 / 5
- Polubienia
- 35
- Pobrania
- 217
- Wydruki
- 3
- Wyświetlenia
- 718
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
*** Thanks for checking out this model! ***
If you appreciate what I'm doing, consider buying me a coffee, and check out my other models for something else you might like!

**********
In this version, I made a few improvements:
- thinner walls and less bulky - faster print.
- Added a spiral pattern for visual interest.
- Eliminated the bump-out feature on the cap for the finger pocket - it's completely round now.
- Refined the rewind arrows.
2 variants of the Cap are provided:
- Arrow Style 1 - conventional
- Arrow Style 2 - triangles
Additional Design Variants are below:
What it fits:
Size | Tape Width (mm) | Length (cm/inches) | Thickness (mm) | Metal Tab Length (mm) |
|---|---|---|---|---|
| 15-150 | 12-15 | 150/60 | 0.45 | 11 |
Useful TIPS:
- PLA works fine for this model.
- Make sure your printer has the extrusion multiplier correctly calibrated. If the nozzle over extrudes, it may make the cap not to spin freely.
- If you encounter the above issue, you can easily adjust down the extrusion multiplier around 0.5-1% (for both parts) to eliminate any binding - it only needs a little bit of clearance.
- For the smoothest operation (not required), apply some paraffin wax to the rim of the body, assemble and spin the assembly freely a few times to distribute the wax, then insert the tape measure to be wound.
If you add this to your collection and/or download the model, please click the LIKE button and give it some STARS!
Remember, you can earn some Prusameters if you post a pic of your make! Plus, it would make my day to see it. ;-D
Happy Printing!
P.S. Please post some constructive feedback if you'd like to see something improved.